Product image

Bambu Lab A1 mini 180x180x180mm

Bambu Lab

Margur er knár þótt hann sé smár, það lýsir A1 mini einna best. Þó prentflöturinn er ekki sá stærsti 180x180x180mm þá er hann er búinn frábærri tækni og skeikar öðrum prenturum í þessum flokki hvað varðar prenthraða og gæði.

Það fylgir einungis 25gr. af PLA efni með og mælum með að kaupa PLA efni til að byrja með.

Mikið af gagnlegum upplýsingum um Bambu Lab prentarana, viðhald og …

Margur er knár þótt hann sé smár, það lýsir A1 mini einna best. Þó prentflöturinn er ekki sá stærsti 180x180x180mm þá er hann er búinn frábærri tækni og skeikar öðrum prenturum í þessum flokki hvað varðar prenthraða og gæði.

Það fylgir einungis 25gr. af PLA efni með og mælum með að kaupa PLA efni til að byrja með.

Mikið af gagnlegum upplýsingum um Bambu Lab prentarana, viðhald og umhirðu má finna á Wiki síðu Bambu Lab

Product Features

  • Full-auto Calibration.
  • 4-Color Printing with AMS lite.
  • Under 48 dB Low Noise in Silent Mode.
  • Full-metal Linear Rails and Bearings.
  • Vibration and Flow Rate Compensation.

Active Flow Rate Compensation

The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration

The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Plug-N-Play

The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.

Active Motor Noise Cancelling

The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger, with CoreXY Speed And Quality(High-Speed Precision)

Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Sync with Bambu Studio and Bambu Handy

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

A1 mini Tech Specs

General information

Item A1 mini Specification
Body Build Volume(W*D*H) 180*180*180 mm³
Toolhead Hot End All-Metal
Nozzle Stainless Steel
Max Hot End Temperature 300 °C
Nozzle Diameter 0.4 mm (Included)0.2 mm, 0.6 mm, 0.8 mm
Heatbed Build Plate Bambu Textured PEI Plate (Included)Bambu Smooth PEI Plate
Max Build Plate Temperature 80°C
Speed Max Speed of Tool Head 500mm/s
Max Acceleration of Tool Head 10000mm/s²
Supported Filament PLA, PETG, TPU, PVA Ideal
ABS, ASA, PC, PA, PET,Carbon/Glass Fiber Reinforced Polymer Not Recommended
Sensors Monitoring Camera Low Framerate Camera (Up to 1080P)Timelapse Supported
Filament Run Out Sensor Yes
Filament Odometry Yes
Power Loss Recover Yes
Filament Tangle Sensor Yes
Physical Dimensions A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kgA1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg

Shop here

The information listed is subject to change without notice. Contents, terms and conditions on vendor's web sites apply.