Bambu PLA Marble - 1kg.
Fallegir marmaralitir sem fela ágætlega laglínur. Endurvinnanlega prentspóla með 1kg. af efni og RFID merki fyrir AMS litastöðvar.
Product Features
- Natural Stone-like Texture
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- AMS Compati…
Fallegir marmaralitir sem fela ágætlega laglínur. Endurvinnanlega prentspóla með 1kg. af efni og RFID merki fyrir AMS litastöðvar.
Product Features
- Natural Stone-like Texture
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- AMS Compatible
- 0.2 mm Nozzle Not Compatible
Bambu PLA Marble mimics the appearance of natural stone.
With inorganic particles in its composition, it offers a vivid stone-like texture that resembles marble, granite, or bricks. It adds a touch of nature to your prints and provides a stunning finish for your projects.
Accessory Compatibility
PLA Marble Hex Code Table
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Downloads
Filament TDS
Filament MSDS
Filament RoHS
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What's in the Box
Filament*1 & Desiccant*1
Package*1
General information
| Recommended | Not Recommended | |
| Build Plate | Cool Plate, High Temperature Plate or Textured PEI Plate | Engineering Plate |
| Hotend | Hardened Steel Nozzle 0.4 / 0.6 / 0.8 mm)Stainless Steel Nozzle (0.4 mm) | Stainless Steel Nozzle (0.2 mm) |
| Glue | Bambu Liquid GlueGlue Stick | / |
| Color | Hex Code | Display |
| White Marble | #F7F3F0 | |
| Red Granite | #AD4E38 | |
| Recommended Printing Settings | ||
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h | |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) | |
| Nozzle Temperature | 190 - 230 °C | |
| Bed Temperature (with Glue) | 35 - 45 °C | |
| Printing Speed | < 250 mm/s | |
| Physical Properties | ||
| Density | 1.22 g/cm³ | |
| Vicat Softening Temperature | 57 °C | |
| Heat Deflection Temperature | 56 °C | |
| Melting Temperature | 156 °C | |
| Melt Index | 32.2 ± 4.5 g/10 min | |
| Mechanical Properties | ||
| Tensile Strength | 33 ± 4 MPa | |
| Breaking Elongation Rate | 6.7 ± 0.5 % | |
| Bending Modulus | 2920 ± 180 MPa | |
| Bending Strength | 75 ± 5 MPa | |
| Impact Strength | 24.0 ± 2.5 kJ/m² |
Shop here
-
3D Verk
The information listed is subject to change without notice. Contents, terms and conditions on vendor's web sites apply.