Bambu PLA Sparkle - 1kg.
Product Features
- Special Sparkling Look
- Relatively High Impact Strength
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- AMS Compatible
-
0.2 mm Nozzle Not Compatible
Bambu PLA Sparkle
Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal parti…
Product Features
- Special Sparkling Look
- Relatively High Impact Strength
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- AMS Compatible
-
0.2 mm Nozzle Not Compatible
Bambu PLA Sparkle
Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest.
However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle!
Display of PLA Sparkle Prints
Accessory Compatibility
PLA Sparkle Hex Code Table
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
General information
| Recommended | Not Recommended | |
| Build Plate | Cool Plate, High Temperature Plate or Textured PEI Plate | Engineering Plate |
| Hotend | Hardened Steel Nozzle 0.4 / 0.6 / 0.8 mm)Stainless Steel Nozzle (0.4 mm) | Stainless Steel Nozzle (0.2 mm) |
| Glue | Bambu Liquid Glue Glue Stick | / |
| Color | Hex Code | Display |
| Slate Gray Sparkle | #8E9089 | |
| Crimson Red Sparkle | #792B36 | |
| Royal Purple Sparkle | #483D8B | |
| Alpine Green Sparkle | #3F5443 | |
| Onyx Black Sparkle | #2D2B28 | |
| Recommended Printing Settings | ||
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h | |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) | |
| Nozzle Temperature | 190 - 230 °C | |
| Bed Temperature (with Glue) | 35 - 45 °C | |
| Printing Speed | < 250 mm/s | |
| Physical Properties | ||
| Density | 1.26 g/cm³ | |
| Vicat Softening Temperature | 57 °C | |
| Heat Deflection Temperature | 55 °C | |
| Melting Temperature | 156 °C | |
| Melt Index | 34.2 ± 3.3 g/10 min | |
| Mechanical Properties | ||
| Tensile Strength | 33 ± 3 MPa | |
| Breaking Elongation Rate | 11.7 ± 0.7 % | |
| Bending Modulus | 2310 ± 140 MPa | |
| Bending Strength | 63 ± 4 MPa | |
| Impact Strength | 66.5 ± 3.6 kJ/m² |
Shop here
-
3D Verk
The information listed is subject to change without notice. Contents, terms and conditions on vendor's web sites apply.