Product image

Bambu Reusable Spool - High Temperature Resistance

Bambu Lab

Tóm spóla fyrir Bambu Lab áfyllingar , er úr hitaþolnu efni PC/ABS blöndu

Specification:

  • Materials: ABS+PC
  • Temperature Resistance: ≤90℃
  • Packing Size: 200*200*67 mm
  • Weight: 250g
  • C…

Tóm spóla fyrir Bambu Lab áfyllingar , er úr hitaþolnu efni PC/ABS blöndu

Specification:

  • Materials: ABS+PC
  • Temperature Resistance: ≤90℃
  • Packing Size: 200*200*67 mm
  • Weight: 250g
  • Color: Black
  • Filament Compatibility: ABS, ASA, PA6-GF, ABS-GF, PAHT-CF, PET-CF, PA6-CF, PC, TPU 95A HF

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.


Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.


Specification:

  • Materials: ABS+PC
  • Temperature Resistance: ≤90℃
  • Packing Size: 200*200*67 mm
  • Weight: 250g
  • Color: Black
  • Filament Compatibility: ABS, ASA, PA6-GF, ABS-GF, PAHT-CF, PET-CF, PA6-CF, PC, TPU 95A HF

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.


Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.

See more detailed description
Hide detailed description

Shop here

  • 3D Verk
    2,890 kr.
    3D Verk ehf 577 3020 Skútuvogi 6, 104 Reykjavík

The information listed is subject to change without notice. Contents, terms and conditions on vendor's web sites apply.