Product image

Creality CFS litastöð

Creality

Lita/efnastöð frá Creality fyrir Creality K2 Plus prentara

Passar fyrir K1 Max með CFS tengisetti sjá hér

  • Hægt að tengja fjórar stöðvar saman fyrir allt að 16 liti í prentun
  • Hentar fyrir stuðningsefni
  • Skjár sýnir raka og hitastig í stöðinni
  • Skynjar ákveðnar spólur sjálfkrafa í stöðina (Auto Filament Identification & Mapping)
  • …

Lita/efnastöð frá Creality fyrir Creality K2 Plus prentara

Passar fyrir K1 Max með CFS tengisetti sjá hér

  • Hægt að tengja fjórar stöðvar saman fyrir allt að 16 liti í prentun
  • Hentar fyrir stuðningsefni
  • Skjár sýnir raka og hitastig í stöðinni
  • Skynjar ákveðnar spólur sjálfkrafa í stöðina (Auto Filament Identification & Mapping)
  • Skiptir sjálfkrafa um lit (Auto Filament Switch & Relay)
  • Skynjar þegar spóla tæmist eða flækist (Auto Run-out/Tangle Detection)
  • Raka þétt geymsla
  • Margar gerðir af prentspólum passa í stöðina
  • CFS works well with K2 series and Creality Hi 3D printers, and it will be adapted to more new and old products.
  • Efni sem eru í stöðinni á sumum myndum fylgja ekki með, eru til að sýna virkni

Snap-away Support Enabled

CFS is able to deliver model supports in a different material that can be easily snapped away or even water-soluble. The resulting 3D model will not show any support marks

Upon loading an RFID-tagged filament, CFS will read its type, color, etc., and sync them to your 3D printeer For regular filaments, you can also edit the info manually. CFS can switch filaments fluently and precisely for a multicolortask. It can also relay a running-out spool with a similar one installedd. Minimal interruption and waste. *Not compatible with flexible TPU, damp BVOH/PVA, or warped cardboard filament spools

Sensors are used to watch over each spool of filament. When a filament runs out or gets tangled, it will pause and notify you immediately. Upon loading an RFID-tagged filament, CFS will read its type, color, etc., and sync them to your 3D printeer For regular filaments, you can also edit the info manually.

You can read the current temperature and humidity clearly. If the humidity level goes excessively high, it will give you a timely alert.The airtight design of CFS can keep the filament from absorbing moisture from the air. Aided by desiccants, the filament will stay dry from the beginning to the end.

Product Name: CFS (Creality Filament System)
Filament Slots :4
Rated Power: 20W
Rated Voltage :DC 24V
CFS Connections: ≤4
Product Dimensions :379*314*276 mm
Net Weight :4.56kg
Status Indicators :4 ( each slot having one)
Multicolor 3D Printing: Yes
Auto Filament Relay: Yes
RFID-tag Reader :Yes
Filament Run-out Detection :Yes
Filament Buffer :Yes
Anti-moisture Storage: Yes with desiccants
Compatible Filaments : "PLA/ABS/PETG/ASA/PET/PA-CF/PLA-CF; not compatible with damp filaments; not compatible with TPU95A or other flexible filaments
Filament Diameter :1.75±0.05mm
Filament Spool Requirement: 1kg spool or any spool with a diameter of 197-202mm; spool width: 42-68mm
See more detailed description
Hide detailed description

The information listed is subject to change without notice. Contents, terms and conditions on vendor's web sites apply.