eSun ePLA-CF 1kg.
Carbon Fiber blandað PLA frá eSun. Carbon Fiber hjálpar til við að fela laglínur og gera prentin fallegri. Mælt er með hertum stál stútum til þess að prenta efni með koltrefjum.
By incorporating German-imported organic impregnated short-cut carbon fibers into PLA, we have enhanced the strength and modulus of the material. The addition of carbon fibers not only reinforces th…
Carbon Fiber blandað PLA frá eSun. Carbon Fiber hjálpar til við að fela laglínur og gera prentin fallegri. Mælt er með hertum stál stútum til þess að prenta efni með koltrefjum.
By incorporating German-imported organic impregnated short-cut carbon fibers into PLA, we have enhanced the strength and modulus of the material. The addition of carbon fibers not only reinforces the PLA but also provides it with a matte appearance and a distinctive carbon fiber sandblasted texture. Whether used as structural components or for aesthetic purposes, ePLA-CF effortlessly excels, thanks to its outstanding attributes. Its printing performance is exceptional, making it suitable for high-speed printing.
General information
| Printing Parameter | |
| Recomended Printing Temp Min | 190 ºC |
| Recomended Printing Temp Max | 230 ºC |
| Recomended Printbed Temperature Min | 45 ºC |
| Recomended Printbed Temperature Max | 60 ºC |
| Recomended Printing Speed Min | 50 mm/s |
| Recommended Printing Speed Max | 300 mm/s |
| Recomended Fan Speed Min | 100 % |
| Recomended Fan Speed Max | 100 % |
| General | |
| Specific gravity | 1,21 g/cm3 GB/T 1033 |
Shop here
-
3D Verk
The information listed is subject to change without notice. Contents, terms and conditions on vendor's web sites apply.